top of page

Market Research Group

Public·9 members
Isaac Hill
Isaac Hill

How Do You Figure How Much Paint To Buy

If you'd like to add this paint calculator to your website or blog, you can copy the provided embed code. Once you've finalized your measurements and other specifications, click or tap "Embed This Tool" to generate a code that you can insert into your website

how do you figure how much paint to buy


As a rule of thumb, one gallon of quality paint will usually cover 400 square feet. One quart will cover 100 square feet. Because you need to cover 328 square feet in this example, one gallon will be adequate to give one coat of paint to the walls. (Coverage will be affected by the porosity and texture of the surface. In addition, bright colors may require a minimum of two coats.)

This article was co-authored by Varga Gulshani and by wikiHow staff writer, Janice Tieperman. Varga Gulshani is a Residential Painting Specialist and the Owner of Elegant Painting based in Washington. With more than 16 years of experience, Varga and his team specialize in residential interior painting, exterior painting, and cabinet painting. Varga and the Elegant Painting team have all received background and verification checks.wikiHow marks an article as reader-approved once it receives enough positive feedback. In this case, several readers have written to tell us that this article was helpful to them, earning it our reader-approved status. This article has been viewed 364,513 times.

The paint calculator is intended to provide the user with the approximate amount of product needed for a project. Product requirements will vary according to factors such as application method and surface condition. To verify product amounts, visit your neighborhood Sherwin-Williams store and speak with a representative.

Signup to become a PaintPerks member. Save your favorite colors, photos, and past orders all in one place. With PaintPerks, you'll always be the first to hear about big sales and have access to everyday savings and exclusive offers. Plus, you can order your paint and supplies right from our site.

1 gallon of paint will cover up to 400 sq. ft. (372 sq. meters) per U.S. gallon (3.78 Liters) on primed, smooth, nonporous surfaces. Coverage figures do not include material loss due to application. Some colors, drastic color changes, or porous surfaces may require more than one coat to achieve uniform finish.

The typical rule-of-thumb is one gallon for about every three to four hundred square feet. However, some paint formulas and wall textures may require more specific amounts. find a paint store near you

Three gallon cans of paint cover up to 1200 square feet. This is enough to cover a large room or a couple of average-sized rooms adjoining each other. You may want to consider this extra can if you are doing a room with vaulted ceilings.

  • The PPG logo is a registered trademark and Colorful Communities and We protect and beautify the world are trademarks of PPG Industries Ohio, Inc. 2023 PPG Industries, Inc. All Rights Reserved. *Colors you see here digitally may vary from what you paint on your surface. For a more accurate color representation, view a color swatch or a paint color sample in the space you wish to paint. Legal Notices & Privacy Policies PPG Terms of Use PPG Architectural Coatings Privacy Policy CA Transparency in Supply Chain Disclosure Global Code of Ethics TISC for PPG Architectural Coatings UK Limited TISC for PPG Industries (UK) Limited PPG Industries UK Ltd 2017 Gender Pay Gap Report Edit Cookie Settings

To determine the number of coats your project requires, first examine the surface you'll be painting. A porous, rough, textured or previously unpainted surface will generally require more paint, as will a project that involves a dramatic color change.

Tip: If you choose a deep, intense color, you may need multiple coats or even a tinted primer for the best results. Less paint may be needed if your color change is subtle, or your home has many "unpaintable" features such as window panes or decorative stone.

To estimate the amount of paint you'll need for the trim, estimate the length of total trim. The average trim width is six inches. Multiply the total trim length by 0.5 feet. To estimate the gutter, determine the total length of the gutter. One linear foot of gutter approximates one square foot.

Before you begin any painting project, you need to estimate the required amount of paint. To make a proper projection, you need to specifically figure the amount of paint that will be required for a specific surface area.

To make it even easier, plan on using one gallon of paint for every 350 square feet. You will need to use a bit more than this amount if the walls are made of drywall. That is because paint penetrates more readily in walls made from this substance. You also have to make allowances for walls that are darker in color, as these surfaces generally take two coats of paint.

To find the number of gallons of paint you need to buy for your painting project, simply divide the overall wall area that is to be painted by 350, or the square footage for one gallon. If the resulting number is more than 0.5 over the round number, buy an additional gallon of paint. However, if the remainder is less than that amount, buy two quarts of paint in addition to the gallons needed.

Then, round the total number to the closest foot. Multiply this answer by 0.5. Again, this is done to calculate the width. Take the answer and divide it by 350 to determine the amount of paint needed for the trim. Usually, in most cases, the answer is less than a quart. However, you may want to paint other woodwork with the same color too. Therefore, buying a full quart in this case may be advantageous.

Once you have at least an idea of your paint needs, record what you actually end up using. That way, you will better know how much to buy if you paint the same room again after several years, or you want to paint a similarly-sized room in your business or residence.

Asphalt Kingdom's Parking Lot Paint Calculator lets you know how many gallons of paint you'll need for your line painting job. For this painting calculator to work, all you need to know is how many linear feet or square feet you'll be painting. Next, input the type of paint (water-based or oil-based) you'll be using, and you get an instant quote for how much the paint will cost you! The paint calculation will also take into account the color you will be using.

While it's beneficial to have a good parking area size-wise, it is just as important to have a parking space painted with bright and crisp lines. It will make your establishment stand out from the rest. Parking lots with clear and visible lines not only helps customers easily navigate your space but also increases safety and reduces chaos.

Before we dive into the specifics of this painting area calculator and why using this handy tool is a must for line stripers and DIYers, let's take a look at the importance of choosing the right striping paint.

Professional striping involves having the right supplies and equipment to complete a paint striping job. Whether you are only brightening existing lines, re-striping over a newly sealcoated surface or painting brand new lines, it's imperative to paint lines with precision.

Apart from acquiring reliable line striping equipment, you need to use the paint specifically designed for your blacktop finish or other concrete surfaces. Using regular paints will never work as they will not properly adhere to blacktop or other concrete surfaces. Buy only high-quality line striping paints specially formulated for your asphalt or concrete.

You can use either oil-based or water-based paint for professional line striping. Both work well with asphalt. While oil-based are highly durable and dries quickly, using it can be tricky as it is not allowed to be used in some US states. The next best thing is to acquire the environmentally-friendly water-based paint. This type of paint is just as long-lasting as the oil-based and it dries in just a few minutes. Also, it's more affordable compared to its counterpart. The only downside is it may not work well in freezing temperatures and water-based paint may likely lead to chipping and cracking in the long run.

Check our store or contact us if you need help line striping a parking lot or you're trying to figure out how to estimate paint needed for a project. We have water-based and oil-based paint specially formulated to adhere to both asphalt and other concrete surfaces. You can also use glass beads with our paints. Increasing the line stripe's reflectivity is essential especially if your parking gets heavy traffic at night. 041b061a72


Welcome to the group! You can connect with other members, ge...


bottom of page